Chapter 85 · Electrical machinery; electronics; sound and TV equipment · Section 16
HS Code 8501.52
Of an output exceeding 750 W but not exceeding 75 kW
Heading 8501: Electric motors and generators (excluding generating sets)
US duty (general)
Free - 3.7%
US HTS lines
2
EU CN codes
4
UK commodity codes
14
Unit
No.
US HTS + UK Tariff v4.0.1596 · updated 2026-09-10 · sources
United States - HTS lines under 8501.52
Source: official Harmonized Tariff Schedule (USITC). "General" is the normal-trade-relations rate; "Special" lists preference programs; "Other" is the column-2 rate. Additional Section 232/301 duties may apply on top.
| HTS code | Description | General | Special | Other | Unit |
|---|---|---|---|---|---|
| 8501.52.40 |
Of an output exceeding 750 W but not exceeding 75 kW > Exceeding 750 W but not exceeding 14.92 kW |
3.7% | Free (A,AU,B,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 35% | No. |
| 8501.52.80 |
Of an output exceeding 750 W but not exceeding 75 kW > Other 2 statistical lines (10-digit)
|
Free | - | 35% | No. |
Estimate the US duty runs in your browser · no caps
Enter the customs value (and quantity, when a rate is per-unit) to estimate the general-rate duty per HTS line. Estimates exclude Section 232/301 surcharges, MPF/HMF and fees. Not a customs ruling.
European Union - CN codes under 8501.52
Source: EU Combined Nomenclature (Eurostat, © European Union, reused per Decision 2011/833/EU). Duty rates and measures live in TARIC; each code links to the official consultation.
| CN code | Description | |
|---|---|---|
| 8501 52 90 | Of an output exceeding 37 kW but not exceeding 75 kW | EU duty (TARIC) → |
| 8501 52 20 | Of an output exceeding 750 W but not exceeding 7,5 kW | EU duty (TARIC) → |
| 8501 52 30 | Of an output exceeding 7,5 kW but not exceeding 37 kW | EU duty (TARIC) → |
| 8501 52 00 | Of an output exceeding 750 W but not exceeding 75 kW | EU duty (TARIC) → |
United Kingdom - commodity codes under 8501.52
Source: UK Integrated Online Tariff (Open Government Licence v3.0). Declarable 10-digit codes go on the customs declaration; check the official page for the current duty and VAT measures.
| Commodity code | Description | |
|---|---|---|
| 8501 52 00 00 | Of an output exceeding 750 W but not exceeding 75 kW | UK duty & VAT → |
| 8501 52 20 00 | Of an output exceeding 750 W but not exceeding 7,5 kW | UK duty & VAT → |
| 8501 52 20 10 | For use in civil aircraft | UK duty & VAT → |
| 8501 52 20 50 | AC synchronous servo motor with resolver and brake for a maximum speed of not more than 6 000rpm,With: - an output of 340W or more but not more than 7,4kW, - a flange of dimensions of not more than 180mm × 180mm, and - a length from flange to extreme end of resolver of not more than 271mm | UK duty & VAT → |
| 8501 52 20 55 | Brushless synchronous alternating current electric motors with permanent magnets, with: -an output power of 1000 W or more, but not more than 1400 W, -a rotor containing 8 poles, generated by permanent magnets composed mainly of praseodymium-neodymium-iron-boron (GB/T 13560-2017 standard), enclosed in a stainless steel cover, -a motor magnet shaft end outer diameter of 10,001 mm or more, but not more than 10,007 mm, -motor terminals located across the 37,00 mm radius and separated by an angle of 30,00 °, -a motor housing made of ADC12 or EN AC46000 aluminium alloy die casting with composition of aluminium-silicon-copper (per JIS H5302-2000 or EN 1706 standard), -a back electromotive force constant (Ke) of 0,0265 V-sec/rad or more, but not more than 0,0293 V- sec/rad, -a back electromotive force (EMF) harmonic order - 5th of no more than 0,4 % (of fundamental) and 7th of no more than 0,2 % (of fundamental), -a synchronous inductance of 33,49 µH or more, but not more than 37,01 µH, -a cogging torque of not more than 15 mNm, -a friction torque in ambient temperature of not more than 20 mNm, -a maximum motor operation temperature of not more than 200 °C, -with or without a spline on the motor shaft | UK duty & VAT → |
| 8501 52 20 70 | Automotive-ready brushless permanently excited magnet synchronous alternating current motor with: -a specified speed of not more than 7000 rpm, -an output of 750 W or more but not more than 1,8 kW (at 12 V), -a flange diameter of 80 mm or more, but not more than 200 mm, -a maximum length of not more than 335 mm, measured from the beginning of the shaft to its outer end, -a housing length of not more than 265 mm, measured from the flange to the outer end, -a steel sheet or die-cast aluminium basic housing consisting of not more than two parts, including electrical components and a flange with two or more but not more than 11 holes, whether or not with a sealing connection (groove with O-ring and protective grease or liquid seal interface), -a stator with single T-tooth design and single coil winding with 9/6 or 12/10 or 12/8 topology and surface magnets, -whether or not with electronic power steering controller, -whether or not with pulley or coupling, -whether or not with rotor position sensor | UK duty & VAT → |
| 8501 52 20 80 | Electric permanent magnet synchronous motor with: -an output power of 850 W, -a rotor containing 8 poles generated by permanent magnets composed mainly with neodymium-iron-boron (per GB/T 13560 standard) enclosed in polyethylene cover, -an outer diameter of motor magnet shaft end with dimension of 10,001 mm or more but no more than 10,007 mm, -terminals located across the radius 26,2 mm and separated by an angle 30,0°, -a housing made of ADC12 or AC46000 aluminium alloy die casting with composition of aluminium-silicon-copper (per JIS H5302 or EN1706 standard) and anodized coating (per ASTM B580 type E standard), -a back electromotive force constant (Ke) of 0,04009 V-sec/rad or more but no more than 0,04431 V-sec/rad, -a back electromotive force harmonic order - 5th of no more than 0,36 % (of fundamental) and 7th of no more than 0,24 % (of fundamental), -a cogging torque of no more than 20 mNm, -a friction torque in ambient temperature of no more than 26,5 mNm, -a maximum temperature of motor operation of no more than 200 °C | UK duty & VAT → |
| 8501 52 20 89 | Other | UK duty & VAT → |
| 8501 52 30 00 | Of an output exceeding 7,5 kW but not exceeding 37 kW | UK duty & VAT → |
| 8501 52 30 10 | For use in civil aircraft | UK duty & VAT → |
| 8501 52 30 90 | Other | UK duty & VAT → |
| 8501 52 90 00 | Of an output exceeding 37 kW but not exceeding 75 kW | UK duty & VAT → |
| 8501 52 90 10 | For use in civil aircraft | UK duty & VAT → |
| 8501 52 90 90 | Other | UK duty & VAT → |
Not a customs ruling. Classification is determined by the importing country's customs authority and depends on the exact product. This page is reference information from official published schedules, not legal advice. For a binding decision, request a ruling (US: CBP CROSS · UK: HMRC ATaR · EU: BTI).
Other subheadings in 8501
8501.00 8501 Electric motors and generators (excluding generating sets)
8501.10 Motors of an output not exceeding 37.5 W
8501.20 Universal AC/DC motors of an output exceeding 37.5 W
8501.31 Of an output not exceeding 750 W
8501.32 Of an output exceeding 750 W but not exceeding 75 kW
8501.33 Of an output exceeding 75 kW but not exceeding 375 kW
8501.34 Of an output exceeding 375 kW
8501.40 Other AC motors, single-phase
8501.51 Of an output not exceeding 750 W
8501.52 Of an output exceeding 750 W but not exceeding 75 kW
8501.53 Of an output exceeding 75 kW
8501.61 Of an output not exceeding 75 kVA
8501.62 Of an output exceeding 75 kVA but not exceeding 375 kVA
8501.63 Of an output exceeding 375 kVA but not exceeding 750 kVA
Sources: U.S. International Trade Commission, Harmonized Tariff Schedule (public domain) · EU Combined Nomenclature © European Union, Eurostat (Decision 2011/833/EU) · UK Integrated Online Tariff, contains public sector information licensed under the Open Government Licence v3.0. Data refreshed weekly. Details on About & Data Sources.