Chapter 84 · Machinery and mechanical appliances; computers · Section 16

HS Code 8481.80

Other appliances

Heading 8481: Taps, cocks, valves and similar appliances, for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves; parts thereof

US duty (general)
2% - 5.6%
US HTS lines
4
EU CN codes
18
UK commodity codes
53
Unit
No., kg

US HTS + UK Tariff v4.0.1596 · updated 2026-09-10 · sources

United States - HTS lines under 8481.80

Source: official Harmonized Tariff Schedule (USITC). "General" is the normal-trade-relations rate; "Special" lists preference programs; "Other" is the column-2 rate. Additional Section 232/301 duties may apply on top.

HTS codeDescriptionGeneralSpecialOtherUnit
8481.80.10 Hand operated >
Of copper
10 statistical lines (10-digit)
  • 8481.80.10.20 - Bath and shower faucets
  • 8481.80.10.30 - Sink and lavatory faucets
  • 8481.80.10.40 - Supply stops
  • 8481.80.10.50 - Other
  • 8481.80.10.60 - Gate type
  • 8481.80.10.70 - Globe type
  • 8481.80.10.75 - Plug type
  • 8481.80.10.85 - Ball type
  • 8481.80.10.90 - Butterfly type
  • 8481.80.10.95 - Other
4% Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) 47% No., kg
8481.80.30 Of copper > Having a pressure rating of 850 kPa or over >
Of iron or steel
12 statistical lines (10-digit)
  • 8481.80.30.10 - Gate type
  • 8481.80.30.15 - Globe type
  • 8481.80.30.20 - Plug type
  • 8481.80.30.25 - Ball type
  • 8481.80.30.30 - Butterfly type
  • 8481.80.30.40 - Other
  • 8481.80.30.55 - Gate type
  • 8481.80.30.60 - Globe type
  • 8481.80.30.65 - Plug type
  • 8481.80.30.70 - Ball type
  • 8481.80.30.75 - Butterfly type
  • 8481.80.30.90 - Other
5.6% Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)2.8% (JP) 45% No., kg
8481.80.50 Of iron or steel > Of steel >
Of other materials
3 statistical lines (10-digit)
  • 8481.80.50.40 - Pressure spray can valves
  • 8481.80.50.60 - Bath, shower, sink and lavatory faucets
  • 8481.80.50.90 - Other
3% Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) 45% No., kg
8481.80.90 Hand operated > Of other materials >
Other
10 statistical lines (10-digit)
  • 8481.80.90.05 - Solenoid valves
  • 8481.80.90.10 - Ballcock mechanisms
  • 8481.80.90.15 - Regulator valves, self-operating, for controlling variables such as temperature, pressure, flow and liquid level
  • 8481.80.90.20 - Control valves designed for proportional operation by a signal from a control device
  • 8481.80.90.25 - Other
  • 8481.80.90.30 - With hydraulic actuators
  • 8481.80.90.35 - Control valves designed for proportional operation by a signal from a control device
  • 8481.80.90.40 - Other
  • 8481.80.90.45 - With thermostatic actuators
  • 8481.80.90.50 - Other
2% Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) 35% No.

Estimate the US duty runs in your browser · no caps

Enter the customs value (and quantity, when a rate is per-unit) to estimate the general-rate duty per HTS line. Estimates exclude Section 232/301 surcharges, MPF/HMF and fees. Not a customs ruling.

European Union - CN codes under 8481.80

Source: EU Combined Nomenclature (Eurostat, © European Union, reused per Decision 2011/833/EU). Duty rates and measures live in TARIC; each code links to the official consultation.

CN codeDescription
8481 80 11 Mixing valves EU duty (TARIC) →
8481 80 79 Other EU duty (TARIC) →
8481 80 81 Ball and plug valves EU duty (TARIC) →
8481 80 73 Of steel EU duty (TARIC) →
8481 80 71 Of cast iron EU duty (TARIC) →
8481 80 40 Valves for pneumatic tyres and inner tubes EU duty (TARIC) →
8481 80 87 Diaphragm valves EU duty (TARIC) →
8481 80 39 Other EU duty (TARIC) →
8481 80 19 Other EU duty (TARIC) →
8481 80 51 Temperature regulators EU duty (TARIC) →
8481 80 99 Other EU duty (TARIC) →
8481 80 69 Other EU duty (TARIC) →
8481 80 61 Of cast iron EU duty (TARIC) →
8481 80 31 Thermostatic valves EU duty (TARIC) →
8481 80 59 Other EU duty (TARIC) →
8481 80 85 Butterfly valves EU duty (TARIC) →
8481 80 63 Of steel EU duty (TARIC) →
8481 80 00 Other appliances EU duty (TARIC) →

United Kingdom - commodity codes under 8481.80

Source: UK Integrated Online Tariff (Open Government Licence v3.0). Declarable 10-digit codes go on the customs declaration; check the official page for the current duty and VAT measures.

Commodity codeDescription
8481 80 00 00 Other appliances UK duty & VAT →
8481 80 11 00 Mixing valves UK duty & VAT →
8481 80 11 10 For use in certain types of aircraft UK duty & VAT →
8481 80 11 90 Other UK duty & VAT →
8481 80 19 00 Other UK duty & VAT →
8481 80 19 10 For use in certain types of aircraft UK duty & VAT →
8481 80 19 90 Other UK duty & VAT →
8481 80 31 00 Thermostatic valves UK duty & VAT →
8481 80 39 00 Other UK duty & VAT →
8481 80 40 00 Valves for pneumatic tyres and inner tubes UK duty & VAT →
8481 80 40 10 For use in certain types of aircraft UK duty & VAT →
8481 80 40 90 Other UK duty & VAT →
8481 80 51 00 Temperature regulators UK duty & VAT →
8481 80 59 00 Other UK duty & VAT →
8481 80 59 20 Pressure regulating valve for incorporation into compressors of motor vehicle air condition units UK duty & VAT →
8481 80 59 30 Two-way flow control valve with housing, with: - at least 5, but not more than 16 outlet holes with at least 0,05 mm, but not more than 0,5 mm diameter, - at least 330 cm³/minute, but not more than 5 000 cm³/minute flow rate, - at least 19, but not more than 300 MPa operating pressure UK duty & VAT →
8481 80 59 40 Flow-control valve -|made of steel, -|with an outlet hole with a diameter of at least 0,05mm or more, but not more than 0,5|mm, -|with an inlet hole with a diameter of at least 0,1|mm, but not more than 1,3|mm, -|with chromium nitride coating, -|with a surface roughness of Rp 0,4 UK duty & VAT →
8481 80 59 50 Electromagnetic valve for quantity control with -|a plunger, -|a solenoid with a of coil resistance of at least 1,85 Ohm, but not more than 8,2|Ohm UK duty & VAT →
8481 80 59 60 Electromagnetic valve for quantity control<br>- with a solenoid with a coil resistance of at least 0,19 Ohm, but not more than 0,66 Ohm, and with an inductance of not more than 1 mH<br> UK duty & VAT →
8481 80 59 70 Flow-control valve -made of steel, -with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm, -with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm UK duty & VAT →
8481 80 59 80 Solenoid valve for combustion engine oil pump to regulate the quantity of oil in the pump: -with a cable of length of 550 mm or more but not more than 700 mm incorporating an electrical connector, -with an operating pressure of not more than 5.5 bar, -with an operating voltage of 9 VDC or more but not more than 16 VDC, -with a valve's base width of 22 mm or more but not more than 27 mm, -with a valve's length of 55 mm or more but not more than 110 mm, for use in the manufacture of motor vehicle engines UK duty & VAT →
8481 80 59 90 Other UK duty & VAT →
8481 80 61 00 Of cast iron UK duty & VAT →
8481 80 63 00 Of steel UK duty & VAT →
8481 80 63 50 For use in certain types of aircraft UK duty & VAT →
8481 80 63 90 Other UK duty & VAT →
8481 80 69 00 Other UK duty & VAT →
8481 80 69 50 For use in certain types of aircraft UK duty & VAT →
8481 80 69 60 Four-way reversing valve for refrigerants, consisting of: -|a solenoid pilot valve -|a brass valve body including valve slider and copper connections with a working pressure up to 4,5|MPa UK duty & VAT →
8481 80 69 99 Other UK duty & VAT →
8481 80 71 00 Of cast iron UK duty & VAT →
8481 80 73 00 Of steel UK duty & VAT →
8481 80 73 10 For use in certain types of aircraft UK duty & VAT →
8481 80 73 20 Pressure- and flow-control valve controlled by external electromagnet:<br> <br><br><br>- made of steel and/or steel alloy(s),<br> <br><br><br>- without integrated circuit,<br> <br><br><br>- of not more than 1000 kPa operating pressure,<br> <br><br><br>- with a flow quantity of not more than 5 l/min,<br> <br><br><br>- without an electromagnet<br> UK duty & VAT →
8481 80 73 90 Other UK duty & VAT →
8481 80 79 00 Other UK duty & VAT →
8481 80 79 10 For use in certain types of aircraft UK duty & VAT →
8481 80 79 40 Service valve which suits for R410A or R32 gas while connecting indoor and outdoor units with: -a withstanding pressure of the valve body of 6,3 MPa, -a leakage ratio of less than 1.6 g/a, -an impurity ratio of less than 1.2 mg/PCS, -an airtight pressure of the valve body of 4.2 Mpa for use in the manufacture of air conditioners UK duty & VAT →
8481 80 79 90 Other UK duty & VAT →
8481 80 81 00 Ball and plug valves UK duty & VAT →
Not a customs ruling. Classification is determined by the importing country's customs authority and depends on the exact product. This page is reference information from official published schedules, not legal advice. For a binding decision, request a ruling (US: CBP CROSS · UK: HMRC ATaR · EU: BTI).

Other subheadings in 8481

Sources: U.S. International Trade Commission, Harmonized Tariff Schedule (public domain) · EU Combined Nomenclature © European Union, Eurostat (Decision 2011/833/EU) · UK Integrated Online Tariff, contains public sector information licensed under the Open Government Licence v3.0. Data refreshed weekly. Details on About & Data Sources.